價格：免費
更新日期：2019-06-25
檔案大小：1.2M
目前版本：022
版本需求：Android 7.0 以上版本
官方網站：https://mcprotector.lv
Email：info@mcprotector.lv
聯絡地址：Chantal Pro SIA Bebru 16-34 Jekabpils LV-5201 Latvia
Multi-camera support, if available;
Saving settings for each camera separately;
Record at 24*, 25* and 30 fps. Other modes are supported if they are standard (not high-speed modes);
Supports almost all available resolutions;
Two AVC and HEVC codecs;
Bitrate up to 500Mb/s, if phone can. Values above the systems are highlighted in red;
Noise reduction and sharpness settings;
Stabilization settings, if supported by phone and announced in Camera2 API;
Hot pixels correction settings;
Customizable Log curve with preset saving;
GOP Setup;
Unprocessed or standard sound;
Selecting the audio sample rate;
Sound bitrate up to 510kb/s;
Ability to record sound in WAV next to MP4 (same filename);
The ability to record sound in WAV and then duplicate it to MP4 container (WAV remains);
Histogram;
Focus peaking;
Ability to stop recording by double tap or by long press;
Brightness adjustment: system, maximum, maximum at setting + system at recording;
The ability to write to a memory card (requires a fast memory card);
Dividing the record into parts. Many phones are not able to write files larger than 4GB. This setting resolves the issue;
Ability to write with overlap. Each following file has a part of the previous one. The phone must be able to write to a carrier at a speed twice the speed required for a single file;
Ability to write one file after another without overlapping;
Timer on the record button. Counts not only time, but file size;
Dropped frames counter. At the beginning of the recording, a pair of frames is always lost;
Shutter speed depends on frame rate;
Exposure modes for reducing the flicker of incandescent bulbs;
Automatic and manual exposure;
Adjusting the ISO by half-stops or the exact convenient knob. The slider is called by long press on the ISO value in manual exposure mode;
Switching between exposure modes aside by pushing the button with three dots;
Auto tracking focus, touch focus;
Manual focus with a double-touch zoom to the place where the touch was made. Function for more precise manual focusing;
Auto focus control. Special indicator reflects the value of focus;
Auto white balance lock;
Auto exposure lock;
Autosaving of all settings;
All settings related to the camera are based on the information available in the Camera2 API. If the manufacturer considered it his duty, to close something from third-party applications, then there is no point in wanting to see it.
«The factory/stock camera can this» is not the argument.
Especially recommended for Sony XZ1 / XZ2 / XZ3.
* Sony devices work with these fps only in manual exposure mode
Requirements: Camera2 API support at level Limited and above.
